Wireless Control Platform – Bluetooth Mesh
ATG LED Lighting and McWong International have joined together to introduce Bluetooth® Mesh Solutions!
ATG LED Lighting introduces a new wireless control platform in collaboration with McWong International based on McWong’s TruBlu™ DLC-certified, SIG-qualified Bluetooth mesh solution. The system is suitable for controlling indoor or outdoor lighting, including light fixtures in one room, multiple rooms, multiple floors, or outdoor spaces such as parking lots, walkways, and façade lighting. The solution is suitable for schools, hospitals, industrial park buildings, warehouses, and much more. Programming is completed on a PC, tablet, or smart phone and training can be accomplished in under an hour.
TruBlu system components include a Bluetooth mesh enabled, bi-level dimming, indoor/outdoor PIR/microwave/ultrasonic sensor w/ load switch, a Bluetooth mesh enabled, bi-level dimming, single or dual channel fixture controller, a Bluetooth mesh enabled, wireless wall switch, a low voltage power supply, and a low voltage power pack w/ relay. TruBlu commissioning tools, utilizing McWong’s technology partner Silvair’s software interface provides for a PC & iOS phone app for setup & commissioning, drag & drop from site plans or floorplans, grouping/dimming/white tuning/daylighting/remote accessing/energy monitoring, three levels of security access, and automatic fixture location.
ATG LED Lighting also provides its customers with a suite of 0-10V wireless lighting controls operating at 433Mhz. This system includes a power pack 0-1 0V dimming module which controls a load according to the command sent from a sensor or dimmer, a wireless PIR occupancy / vacancy sensor which detects peoples movement to see if the space is occupied, then sends wireless commands to the dimming module to control the light (on/off/dim) automatically, a wireless daylight harvesting sensor which measures light in the space, then transmits the light level to the associated dimming module that automatically controls the lights to balance the light level in the space, and a wireless dimmer which can be used to manually turn on/off and dim lights.
ATG LED Lighting continues to offer wireless lighting controls where programming is achieved through a simple, handheld radio frequency remote control. Multiple sensors and remote-control options are available including IR-TECH’s TRANS sensor remote programmer, the RC-100 sensor remote programmer, digital high/low/off passive infrared sensors, a high bay sensor, a high/low/off PIR photo/motion sensor, a bi-level and on/off sensor, a bi-level and daylight harvesting sensor, a microprocessor photocell, and a button photo control.
This trio of wireless control systems enable our customers to address virtually all their control needs for their everyday jobs and they provide additional value to our customers because many utility companies provide higher rebates when a fixture is controlled, and in some cases, the rebate dollars can pay for greater than half of the installed cost of an entire project.
For more information, contact your local ATG LED Representative or call ATG at (951) 245-6222.
Read more about the wireless control platform on Edison Report
We invite you to browse through our Bluetooth Mesh ready devices.
Wireless Lighting Controls
