Warranty Policy
ATG LED Lighting®
For North American LED Lighting Fixtures
ATG LED Lighting warrants to the original purchaser of ATG LED Lighting Domestic LED products listed above that were manufactured for which the ATG LED Lighting Spec Sheet located on our website
contains the words “10 year limited warranty” that, subject to the below terms and conditions of this warranty, when such LED products are properly installed they will comply with ATG LED Lighting
published product specifications for such products and will be free from material defects in material and workmanship for a period of ten (10) years from the date of sale by ATG LED Lighting, or, if lesser,
50,000 hours of operation (at an average of 13.6 hours per day operation). The LED arrays in the Product(s) will be considered defective in material or workmanship only if a total of 15% or more of the
individual light emitting diodes in the Product(s) fail to illuminate.
The above express limited warranty is extended by ATG LED Lighting® only to the original or first end-user purchaser and only for the original installed location. This warranty only applies to products
purchased after June 1, 2017. This warranty is non-transferrable, whether by assignment or operation of law. The original purchaser must provide warranty claims to ATG LED Lighting within the warranty
period promptly upon discovery and in accordance with ATG LED Lighting Return and Repair Procedures as outlined within this document.
Should any defects be found by ATG LED Lighting upon its inspection of the properly returned product, ATG LED Lighting sole responsibility and liability under this warranty will be, at its option, to either
repair or replace the defective part or parts or else make available a new replacement unit that will provide equal or better performance. All decisions regarding the existence or non-existence of defects or
otherwise affecting the warranty shall be made by ATG LED LIGHTING and shall be final and binding on all parties. Where a defective LED product is replaced under this warranty, the balance of the original
warranty period shall remain effective.
Conditions and Exclusions
This warranty does NOT apply to any ATG fixture or lamp whereby the specification sheet listed on ATG’s website on the date of purchase specifically states a warranty period of less than 10 years (i.e., 5 years
or 3 years). This warranty is conditioned upon proper installation, use and maintenance. This warranty will automatically become null and void and shall not be applicable to any LED fixture which (i) has not
been timely paid for, (ii) is not installed and operated in accordance with the current edition of The National Electric Code (NEC), the Standards for Safety of Underwriters’ Laboratory, Inc. (UL) or with ATG LED
Lighting instructions and guidelines, (iii) has been moved from its original installation, (iv) has been installed within an area that has exposure to sulfur or any area with high acidic compounds in use, (v) has
been operated in an ambient temperature or humidity that is higher than 35 degrees Celsius, (vi) has been subjected to a lightning strike, power surge or overvoltage condition, (vii) has its LED Board
subjected to static electricity due to failure to discharge same prior to connecting or disconnecting the lead from the LED board, (viii) was not installed and/or operated in accordance with ATG LED Lighting
instructions and guidelines, (ix) has been mishandled, misused, abused, tampered with, modified or altered by anyone other than ATG ELECTRONICS, (x) has been subjected to abnormal stresses and
operating conditions, or (xi) has been operated without overvoltage and lightning protection devices in place.
Other Manufacturer’s Materials
If, as a courtesy, OR at the request of the end-user/distributor/contractor, ATG supplies, sources or packages with Other Manufacturer’s Materials, such products will be subject to and specifically carry the
Other Manufacturer’s warranty and be subject to the Other Manufacturer’s terms and conditions.
Limitations
Disclaimers & Limitations of Liability
The foregoing warranty is exclusive of all other statutory, written or oral warranties and no other warranties of any kind, statutory, by operation of law or course of performance, or otherwise, are given, herein
expressed or otherwise received. EXCEPT AS EXPRESSLY PROVIDED ABOVE, ATG LED LIGHTING DISCLAIMS ALL REPRESENTATIONS, WARRANTIES AND CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED,
REGARDING THE LED PRODUCTS AND ITS SERVICES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE.
LIMITATION OF LIABILITY. Other than the obligation to repair or replace as provided above, ATG LED Lighting shall have no liability for any losses, expenses or damages as a result of the installation, use,
inability to use, removal or replacement of any LED product. ATG LED Lighting will not under any circumstances whether as a result of breach of contract, breach of warranty, tort, strict liability or otherwise be
liable for consequential, incidental, special or exemplary damages including but not limited to, loss of profits or revenues, loss of any other goods or associated equipment or damage to any associated
equipment, cost of capital, cost of substitute products, facilities or services, down time cost or claims of claimant’s customers. ATG LED Lighting liability on any claim of any kind for any loss or damages
arising out of, resulting from or concerning any LED product, any aspect of this warranty or for any products or services furnished hereunder shall not exceed the price of the fixture which gives rise to the
claim.
Return and Repair Procedures
All warranty requests and or questions are to be directed to ATG LED Lighting Customer Service Department (CSD) at 888-515-7770. If deemed necessary, the CSD will issue a Returned Merchandise
Authorization (RMA) number which must be included on both the packing slip of the component or fixture being returned and on the outside of the box. You must include your name and contact
information, including your email address, on the packing slip so that we can contact you easily. Each component or fixture must be packaged very carefully and properly so as to prevent damages in
shipment and must be shipped freight prepaid. Please obtain a proof of delivery to ensure that the material is received.
Once the component or fixture has been received and tested, an evaluation report will be provided to the end user via email. This report will clarify the following:
- A) The component / fixture is covered under the warranty policy and will either be repaired or replaced.
- B) The component / fixture is not covered under the warranty policy and the reason for this determination.
If ATG LED LIGHTING determines that the component or fixture is covered under the warranty, then the appropriate repairs will be started or a replacement fixture will be manufactured and shipped. Please
note that in the event the returned component or fixture is found not to be covered under this warranty, you may be subject to a labor charge for the evaluation process and will be responsible for all return
shipping charges and fees. For components and fixtures determined to be covered under this warranty prior to the first anniversary of the Sale Date, the repaired or replacement component or fixture will be
returned to you at no charge. You will be responsible for all other shipping charges.
No Labor Reimbursement
All components and fixtures determined to be covered by this warranty as provided above, will be repaired or replaced at no charge to the customer, however, except as expressly provided above with
respect to recessed and linear fixtures during the first year, the customer must hire and pay for an electrician to remove and reinstall such components and fixtures. No labor costs will be covered for the
removal or reinstallation of any components or fixtures. The warranty does not cover modifications, repairs or replacements, or the related labor or materials costs, that may be necessary to facilities or third
party products in connection with the removal, repair, or replacement of any LED product under this warranty
