LSI 4″ & 5” Straight Square Steel

Pole Shaft

• Straight poles are 4” and 5” square.
• Pole shaft is electro-welded ASTM-A500 Grade C steel tubing with a minimum yield strength of 50,000 psi.
• On Tenon Mount steel poles, tenon is 2-3/8” O.D. high-strength pipe. Tenon is 4-3/4” in length.

Hand-Hole

• Standard hand-hole location is 12” above pole base.
• Poles 22′  and above have a 3” x 6” reinforced hand-hole. Shorter poles have a 2” x 4” non-reinforced hand-hole.

Base

• Pole base is ASTM-A36 hot-rolled steel plate with a minimum yield strength of 36,000 psi.
• Two-piece square base cover is optional.

Anchor Bolts

• Poles are furnished with anchor bolts featuring zinc-plated double nuts and washers. Galvanized anchor bolts are optional.
• Anchor bolts conform to ASTM F 1554-07a Grade 55 with a minimum yield strength of 55,000 psi.

Ground Lug

• Ground lug is standard.

Duplex Receptacle

• Weatherproof duplex receptacle is optional.

Ground Fault Circuit Interrupter

• Self-testing ground fault circuit interrupter is optional.